Fully Accredited Whole Building Air Leakage Testing and Window Testing in Augusta
Building Envelope Testing in Augusta, GA
Building-envelope performance can affect energy use, moisture control, occupant comfort, and the long-term durability of commercial properties throughout Augusta and the Central Savannah River Area.
From healthcare and institutional facilities near Augusta’s Medical District to commercial development in West Augusta, multifamily construction, educational facilities, and projects extending into Columbia County, exterior building systems need to perform as intended after installation.
QED LAB provides building envelope testing in Augusta, Georgia, for commercial construction and existing properties throughout Augusta-Richmond County and the greater CSRA.
Our capabilities include air barrier testing, commercial blower door testing, whole-building air leakage testing, window and curtain wall testing, ASTM water penetration testing, AAMA field testing, infrared thermography, water intrusion diagnostics, and building enclosure commissioning support.
Testing can be incorporated into new construction quality assurance, commissioning programs, specification compliance, or investigations into existing air and water leakage problems.
Commercial Building Envelope Testing in Augusta-Richmond County
A building enclosure is a collection of interconnected systems.
Exterior walls, roofs, windows, storefronts, curtain walls, doors, waterproofing, insulation, and air barriers must work together to control air, water, heat, and moisture.
The connections between those systems are often particularly important.
Window perimeters, roof-to-wall transitions, penetrations, flashing conditions, expansion joints, sealant joints, and changes between exterior materials can all become potential leakage locations.
QED LAB provides commercial building envelope testing in Augusta-Richmond County to help project teams evaluate these systems under controlled field conditions.
Rather than relying exclusively on visual inspection, performance testing provides measurable information about how the installed building enclosure behaves.
Air Barrier Testing in Augusta, GA
A continuous air barrier helps control unwanted air movement through the exterior enclosure.
When gaps or discontinuities are present, uncontrolled airflow can occur through walls, roof transitions, penetrations, windows, doors, and other exterior interfaces.
QED LAB provides air barrier testing in Augusta, Georgia, for commercial and larger-building projects.
Testing may be required by project specifications, enclosure commissioning requirements, quality-control programs, or building-performance goals.
If excessive leakage is identified, additional diagnostic work can help narrow down where air is moving through the enclosure.
This allows project teams to focus corrective work on actual problem areas.
Commercial Blower Door Testing in Augusta
Blower door testing can measure the airtightness of an entire commercial building.
For larger structures, multiple calibrated fan systems may be required to establish and maintain the specified pressure difference across the exterior enclosure.
QED LAB provides commercial blower door testing in Augusta, GA, including whole-building air leakage testing for projects throughout Richmond County and the surrounding CSRA.
Depending on project requirements, testing may reference procedures such as ASTM E779 or ASTM E1827.
Commercial testing requires coordination before arriving on site. Building size, exterior openings, HVAC configuration, intentional penetrations, temporary construction conditions, pressure zones, and weather can all influence the testing process.
QED LAB works with the project team to establish testing requirements and prepare the building appropriately.
Whole-Building Air Leakage Testing in Augusta
Whole-building air leakage testing evaluates how the exterior enclosure performs as a complete system.
During testing, calibrated fans create a controlled pressure difference between the interior and exterior of the building. The airflow necessary to maintain that pressure is measured.
Those measurements can then be evaluated against applicable project criteria.
Whole-building testing can be particularly valuable because leakage may not be concentrated in one obvious location.
A building could have air leakage distributed across window perimeters, exterior doors, wall penetrations, roof transitions, loading areas, or other enclosure interfaces.
When needed, QED LAB can combine quantitative testing with diagnostic methods to help identify where leakage is occurring.
Window Testing in Augusta, GA
Installed windows contain multiple interfaces that can affect air and water performance.
The window product itself may meet the project’s requirements while problems develop around the perimeter because of installation, flashing, sealant, or adjacent construction.
QED LAB provides field window testing in Augusta for commercial, multifamily, healthcare, hospitality, educational, and institutional projects.
Depending on project specifications, field testing may evaluate air leakage, water penetration, or both.
Testing representative windows while construction is still underway can help identify recurring installation issues before those details are repeated throughout the building.
Curtain Wall and Storefront Testing in Augusta
Commercial buildings throughout Downtown Augusta, West Augusta, the Medical District, and other parts of Richmond County frequently incorporate storefront, curtain wall, and other glazed exterior assemblies.
These systems contain numerous joints, gaskets, sealants, and transitions that must work together.
QED LAB performs curtain wall and storefront testing in Augusta, GA, using applicable field-testing procedures based on the project requirements.
Testing can help evaluate installed assembly performance and identify localized leakage around joints, glazing, perimeter seals, and connections to adjacent wall systems.
AAMA 501.2 Testing in Augusta
AAMA 501.2 hose nozzle testing can be used to evaluate specific joints and details in installed curtain wall and storefront systems.
The procedure applies controlled water to targeted exterior joints while the interior side is monitored for leakage.
Because the testing can focus on relatively small areas, it can be useful for isolating a suspected problem.
QED LAB provides AAMA 501.2 testing in Augusta for construction quality control and water-intrusion investigations when appropriate.
Results can help contractors and consultants determine whether a particular joint or seal requires corrective work.
AAMA 502 Field Testing in Augusta
Installed windows and doors can perform differently from similar products tested under laboratory conditions.
Field installation introduces perimeter seals, flashing, rough openings, transitions, fasteners, and workmanship that can affect the completed assembly.
QED LAB supports AAMA 502 field testing in Augusta, Georgia, when required by project specifications.
Testing installed fenestration provides project teams with information about the actual field condition and can help identify installation-related air or water leakage.
AAMA 503 Testing for Storefront and Curtain Wall Systems
Commercial projects involving storefronts, curtain walls, and other installed fenestration assemblies may specify AAMA 503 field testing.
QED LAB can support Augusta-area projects requiring field evaluation of these systems.
Testing during construction can be especially valuable because corrective work may be easier to complete while exterior assemblies remain accessible.
It can also help determine whether an observed issue is isolated or potentially associated with a repeated installation detail.
ASTM E1105 Water Penetration Testing in Augusta
Windows and exterior wall openings need to resist water under changing weather conditions.
ASTM E1105 is commonly used to evaluate water penetration through installed exterior windows, doors, and curtain wall assemblies.
During ASTM E1105 testing in Augusta, water is applied to the exterior of the test area while a controlled pressure difference is established across the assembly.
The interior is monitored for evidence of water penetration.
Testing can help project teams evaluate installed fenestration during construction or investigate reported water intrusion in an existing building.
ASTM E331 Water Penetration Testing
Depending on project specifications and assembly type, QED LAB can also support testing involving ASTM E331.
This method evaluates water penetration through exterior assemblies under a uniform static air pressure difference.
The appropriate test procedure depends on the project’s requirements and the system being evaluated.
QED LAB can review project specifications to help determine the requested field-testing scope.
Water Intrusion Testing in Augusta
Water leaks can be difficult to diagnose because the location where moisture becomes visible isn’t necessarily the point where water entered the building.
Water may travel behind exterior finishes, along flashing, through framing, or across other concealed surfaces.
QED LAB provides water intrusion testing in Augusta, GA, to help identify potential leakage paths under controlled conditions.
Investigations can focus on areas such as:
- Window perimeters
- Curtain wall joints
- Storefront systems
- Exterior doors
- Sealant joints
- Wall penetrations
- Flashing transitions
- Roof-to-wall interfaces
- Changes between exterior materials
Controlled testing allows individual areas to be evaluated systematically rather than waiting for another weather event to reproduce the problem.
Building Envelope Testing Near Augusta's Medical District
Augusta has a significant concentration of healthcare and medical facilities, making enclosure performance particularly relevant to projects around the Augusta Medical District.
Healthcare buildings can contain complex mechanical systems, extensive exterior glazing, multiple pressure relationships, and demanding indoor environmental requirements.
Air leakage and moisture intrusion can complicate building performance and may be especially important to identify during construction.
QED LAB can support healthcare building envelope testing in Augusta with air leakage testing, fenestration testing, water penetration testing, infrared diagnostics, and other field-testing services based on project requirements.
Building Envelope Testing for Schools and Universities
Augusta and the surrounding region also contain educational and institutional facilities where enclosure durability and energy performance can be important long-term considerations.
QED LAB can provide building-envelope field testing for schools, colleges, universities, training facilities, and other institutional projects throughout Augusta-Richmond County and the CSRA.
Testing can be coordinated during construction to evaluate representative windows, exterior wall assemblies, air barriers, or whole-building airtightness.
Testing Near Fort Eisenhower
Commercial, institutional, housing, and support development around the Fort Eisenhower area can involve a wide range of building-envelope systems and project requirements.
QED LAB can support projects in the greater Augusta area requiring independent field verification of air and water performance.
Depending on the project, services may include commercial blower door testing, air barrier testing, fenestration testing, water penetration testing, and building enclosure commissioning support.
For projects with specific government or project testing requirements, QED LAB can review the applicable specifications before developing the testing scope.
Infrared Thermography in Augusta
Infrared thermography can help building professionals identify temperature patterns that may warrant additional investigation.
Under appropriate conditions, thermal imaging can reveal patterns associated with air leakage, insulation irregularities, thermal bridging, or moisture-related conditions.
QED LAB can incorporate infrared thermography in Augusta building-envelope investigations when appropriate.
Thermal images should be interpreted alongside environmental conditions, building construction, visual observations, and other test results rather than treated as an independent diagnosis.
Building Enclosure Commissioning in Augusta
Building enclosure commissioning provides a structured approach to evaluating whether exterior enclosure systems meet project requirements.
Field testing is often an important component of that process.
QED LAB supports building enclosure commissioning in Augusta, GA, through independent performance testing and verification.
Depending on the project, testing may involve windows, storefronts, curtain walls, air barriers, water penetration, or whole-building air leakage.
Coordinating testing at appropriate construction milestones can help identify problems while corrective work is still practical.
Building Envelope Testing Across the CSRA
QED LAB’s Augusta service area can extend beyond the immediate city into the Central Savannah River Area (CSRA).
This allows contractors, developers, architects, consultants, and building owners to coordinate building-envelope testing for projects throughout the greater regional market.
Whether the project is located in Downtown Augusta, West Augusta, South Augusta, near the Medical District, around Fort Eisenhower, in Martinez, Evans, Columbia County, or elsewhere in the Augusta-Richmond County area, QED LAB can help establish an appropriate testing scope.
Why Test Before the Building Is Complete?
Waiting until the end of construction can make enclosure problems more difficult to correct.
If a recurring window installation issue is identified after hundreds of windows have been installed, corrective work can become considerably more complicated.
Testing representative assemblies earlier gives the project team an opportunity to evaluate workmanship while similar work is still underway.
Whole-building testing can then provide another level of verification once the enclosure reaches the appropriate stage of completion.
The best testing schedule depends on project specifications, construction sequencing, and the systems being evaluated.
Schedule Building Envelope Testing in Augusta, GA
QED LAB provides building envelope testing in Augusta, Richmond County, Columbia County, and the greater CSRA for commercial construction and existing-building investigations.
Our capabilities include commercial blower door testing, whole-building air leakage testing, air barrier testing, window testing, storefront and curtain wall testing, AAMA 501.2, AAMA 502, AAMA 503, ASTM E1105, ASTM E331, water intrusion testing, infrared thermography, and building enclosure commissioning support.
If you’re managing a project in Downtown Augusta, the Medical District, West Augusta, South Augusta, near Fort Eisenhower, Evans, Martinez, or elsewhere in the Augusta region, contact QED LAB to discuss your testing requirements.
Providing project drawings, specifications, applicable testing standards, approximate building size, and construction schedule can help determine the appropriate scope.
Frequently Asked Questions
Does QED LAB provide commercial blower door testing in Augusta, GA?
Yes. QED LAB provides commercial blower door and whole-building air leakage testing for projects in Augusta and the surrounding CSRA.
Can QED LAB perform air barrier testing in Richmond County?
Yes. QED LAB can support commercial air barrier and whole-building airtightness testing throughout Augusta-Richmond County and surrounding communities.
Do you provide building envelope testing in Evans and Martinez?
Yes. QED LAB can support projects in Evans, Martinez, Columbia County, and other communities throughout the greater Augusta area.
Can QED LAB test windows for water penetration?
Yes. Field testing can evaluate installed windows, doors, curtain walls, storefronts, and related assemblies for water penetration based on the applicable project requirements.
What ASTM and AAMA testing can QED LAB provide?
Depending on project specifications, QED LAB can support procedures including ASTM E779, ASTM E1827, ASTM E1105, ASTM E331, AAMA 501.2, AAMA 502, and AAMA 503, along with other specified enclosure-testing requirements.
Does QED LAB work on healthcare and institutional buildings in Augusta?
Yes. QED LAB’s building-envelope testing services can support healthcare, educational, institutional, multifamily, commercial, hospitality, industrial, and other building types throughout the Augusta area.
Looking for more information about Building Envelope Testing?
At QED LAB, we offer a Lunch and Learn where we provide valuable insights into code requirements and building envelope testing. Our experts will explain how these tests are performed and meet compliance with building codes. Join us for lunch and learn more about building envelope testing today!